Test Preparation Checklist


Dr. Richard M. Felder is the Hoechst Celanese Professor Emeritus of Chemical Engineering at North Carolina State University.


  • Did you make a serious effort to understand the text? (Just hunting for relevant worked-out examples doesn’t count.)
  • Did you work with classmates on homework problems, or at least check your solutions with others?
  • Did you attempt to outline every homework problem solution before working with classmates?
  • Did you participate actively in homework group discussions (contributing ideas, asking questions)?
  • Did you consult with the instructor or teaching assistants when you were having trouble with something?
  • Did you understand ALL of your homework problem solutions when they were handed in?
  • Did you ask in class for explanations of homework problem solutions that weren’t clear to you?

Test preparation

  • If you had a study guide, did you carefully go through it before the test and convince yourself that you could do everything on it?
  • Did you attempt to outline lots of problem solutions quickly, without spending time on the algebra and calculations?
  • Did you go over the study guide and problems with classmates and quiz one another?
  • If there was a review session before the test, did you attend it and ask questions about anything you weren’t sure about?
  • Did you get a reasonable night’s sleep before the test? (If your answer is no, your answers to previous questions may not matter.)

The Definitive C++ Book Guide and List

Source: The Definitive C++ Book Guide and List (Stack Overflow Answer)


Introductory, no previous programming experience

  • Programming: Principles and Practice Using C++ (Bjarne Stroustrup) (updated for C++11/C++14) An introduction to programming using C++ by the creator of the language. A good read, that assumes no previous programming experience, but is not only for beginners.

Introductory, with previous programming experience

  • C++ Primer * (Stanley Lippman, Josée Lajoie, and Barbara E. Moo) (updated for C++11) Coming at 1k pages, this is a very thorough introduction into C++ that covers just about everything in the language in a very accessible format and in great detail. The fifth edition (released August 16, 2012) covers C++11. [Review]
  • A Tour of C++ (Bjarne Stroustrup) (EBOOK) The “tour” is a quick (about 180 pages and 14 chapters) tutorial overview of all of standard C++ (language and standard library, and using C++11) at a moderately high level for people who already know C++ or at least are experienced programmers. This book is an extended version of the material that constitutes Chapters 2-5 of The C++ Programming Language, 4th edition.
  • Accelerated C++ (Andrew Koenig and Barbara Moo) This basically covers the same ground as the C++ Primer, but does so on a fourth of its space. This is largely because it does not attempt to be an introduction to programming, but an introduction to C++ for people who’ve previously programmed in some other language. It has a steeper learning curve, but, for those who can cope with this, it is a very compact introduction into the language. (Historically, it broke new ground by being the first beginner’s book to use a modern approach at teaching the language.) [Review]
  • Thinking in C++ (Bruce Eckel) Two volumes; is a tutorial style free set of intro level books. Downloads: vol 1, vol 2. Unfortunately they’re marred by a number of trivial errors (e.g. maintaining that temporaries are automatically const), with no official errata list. A partial 3rd party errata list is available at (http://www.computersciencelab.com/Eckel.htm), but it’s apparently not maintained.

* Not to be confused with C++ Primer Plus (Stephen Prata), with a significantly less favorable review.

Best practices

  • Effective C++ (Scott Meyers) This was written with the aim of being the best second book C++ programmers should read, and it succeeded. Earlier editions were aimed at programmers coming from C, the third edition changes this and targets programmers coming from languages like Java. It presents ~50 easy-to-remember rules of thumb along with their rationale in a very accessible (and enjoyable) style. For C++11 and C++14 the examples and a few issues are outdated and Effective Modern C++ should be preferred. [Review]
  • Effective Modern C++ (Scott Meyers) This is basically the new version of Effective C++, aimed at C++ programmers making the transition from C++03 to C++11 and C++14.
  • Effective STL (Scott Meyers) This aims to do the same to the part of the standard library coming from the STL what Effective C++ did to the language as a whole: It presents rules of thumb along with their rationale. [Review]


  • More Effective C++ (Scott Meyers) Even more rules of thumb than Effective C++. Not as important as the ones in the first book, but still good to know.
  • Exceptional C++ (Herb Sutter) Presented as a set of puzzles, this has one of the best and thorough discussions of the proper resource management and exception safety in C++ through Resource Acquisition is Initialization (RAII) in addition to in-depth coverage of a variety of other topics including the pimpl idiom, name lookup, good class design, and the C++ memory model. [Review]
  • More Exceptional C++ (Herb Sutter) Covers additional exception safety topics not covered in Exceptional C++, in addition to discussion of effective object oriented programming in C++ and correct use of the STL. [Review]
  • Exceptional C++ Style (Herb Sutter) Discusses generic programming, optimization, and resource management; this book also has an excellent exposition of how to write modular code in C++ by using nonmember functions and the single responsibility principle. [Review]
  • C++ Coding Standards (Herb Sutter and Andrei Alexandrescu) “Coding standards” here doesn’t mean “how many spaces should I indent my code?” This book contains 101 best practices, idioms, and common pitfalls that can help you to write correct, understandable, and efficient C++ code. [Review]
  • C++ Templates: The Complete Guide (David Vandevoorde and Nicolai M. Josuttis) This is the book about templates as they existed before C++11. It covers everything from the very basics to some of the most advanced template metaprogramming and explains every detail of how templates work (both conceptually and at how they are implemented) and discusses many common pitfalls. Has excellent summaries of the One Definition Rule (ODR) and overload resolution in the appendices. A second edition is scheduled for 2017. [Review]


  • Modern C++ Design (Andrei Alexandrescu) A groundbreaking book on advanced generic programming techniques. Introduces policy-based design, type lists, and fundamental generic programming idioms then explains how many useful design patterns (including small object allocators, functors, factories, visitors, and multimethods) can be implemented efficiently, modularly, and cleanly using generic programming. [Review]
  • C++ Template Metaprogramming (David Abrahams and Aleksey Gurtovoy)
  • C++ Concurrency In Action (Anthony Williams) A book covering C++11 concurrency support including the thread library, the atomics library, the C++ memory model, locks and mutexes, as well as issues of designing and debugging multithreaded applications.
  • Advanced C++ Metaprogramming (Davide Di Gennaro) A pre-C++11 manual of TMP techniques, focused more on practice than theory. There are a ton of snippets in this book, some of which are made obsolete by typetraits, but the techniques, are nonetheless useful to know. If you can put up with the quirky formatting/editing, it is easier to read than Alexandrescu, and arguably, more rewarding. For more experienced developers, there is a good chance that you may pick up something about a dark corner of C++ (a quirk) that usually only comes about through extensive experience.

Reference Style – All Levels

  • The C++ Programming Language (Bjarne Stroustrup) (updated for C++11) The classic introduction to C++ by its creator. Written to parallel the classic K&R, this indeed reads very much alike it and covers just about everything from the core language to the standard library, to programming paradigms to the language’s philosophy. [Review]
  • C++ Standard Library Tutorial and Reference (Nicolai Josuttis) (updated for C++11) The introduction and reference for the C++ Standard Library. The second edition (released on April 9, 2012) covers C++11. [Review]
  • The C++ IO Streams and Locales (Angelika Langer and Klaus Kreft) There’s very little to say about this book except that, if you want to know anything about streams and locales, then this is the one place to find definitive answers. [Review]

C++11/14 References:

  • The C++ Standard (INCITS/ISO/IEC 14882-2011) This, of course, is the final arbiter of all that is or isn’t C++. Be aware, however, that it is intended purely as a reference for experienced users willing to devote considerable time and effort to its understanding. As usual, the first release was quite expensive ($300+ US), but it has now been released in electronic form for $60US.
  • The C++14 standard is available, but seemingly not in an economical form – directly from the ISO it costs 198 Swiss Francs (about $200 US). For most people, the final draft before standardization is more than adequate (and free). Many will prefer an even newer draft, documenting new features that are likely to be included in C++17.
  • Overview of the New C++ (C++11/14) (PDF only) (Scott Meyers) (updated for C++1y/C++14) These are the presentation materials (slides and some lecture notes) of a three-day training course offered by Scott Meyers, who’s a highly respected author on C++. Even though the list of items is short, the quality is high.
  • The C++ Core Guidelines (C++11/14/17/…) (edited by Bjarne Stroustrup and Herb Sutter) is an evolving online document consisting of a set of guidelines for using modern C++ well. The guidelines are focused on relatively higher-level issues, such as interfaces, resource management, memory management and concurrency affecting application architecture and library design. The project was announced at CppCon’15 by Bjarne Stroustrup and others and welcomes contributions from the community. Most guidelines are supplemented with a rationale and examples as well as discussions of possible tool support. Many rules are designed specifically to be automatically checkable by static analysis tools.
  • The C++ Super-FAQ (Marshall Cline, Bjarne Stroustrup and others) is an effort by the Standard C++ Foundation to unify the C++ FAQs previously maintained individually by Marshall Cline and Bjarne Stroustrup and also incorporating new contributions. The items mostly address issues at an intermediate level and are often written with a humorous tone. Not all items might be fully up to date with the latest edition of the C++ standard yet.
  • cppreference.com (C++03/11/14/17/…) (initiated by Nate Kohl) is a wiki that summarizes the basic core-language features and has extensive documentation of the C++ standard library. The documentation is very precise but is easier to read than the official standard document and provides better navigation due to its wiki nature. The project documents all versions of the C++ standard and the site allows filtering the display for a specific version. The project was presented by Nate Kohl at CppCon’14.

Classics / Older

Note: Some information contained within these books may not be up-to-date or no longer considered best practice.

  • The Design and Evolution of C++ (Bjarne Stroustrup) If you want to know why the language is the way it is, this book is where you find answers. This covers everything before the standardization of C++.
  • Ruminations on C++ – (Andrew Koenig and Barbara Moo) [Review]
  • Advanced C++ Programming Styles and Idioms (James Coplien) A predecessor of the pattern movement, it describes many C++-specific “idioms”. It’s certainly a very good book and might still be worth a read if you can spare the time, but quite old and not up-to-date with current C++.
  • Large Scale C++ Software Design (John Lakos) Lakos explains techniques to manage very big C++ software projects. Certainly a good read, if it only was up to date. It was written long before C++98, and misses on many features (e.g. namespaces) important for large scale projects. If you need to work in a big C++ software project, you might want to read it, although you need to take more than a grain of salt with it. The first volume of a new edition is expected in 2015.
  • Inside the C++ Object Model (Stanley Lippman) If you want to know how virtual member functions are commonly implemented and how base objects are commonly laid out in memory in a multi-inheritance scenario, and how all this affects performance, this is where you will find thorough discussions of such topics.
  • The Annotated C++ Reference Manual (Bjarne Stroustrup, Margaret A. Ellis) This book is quite outdated in the fact that it explores the 1989 C++ 2.0 version – Templates, exceptions, namespaces and new casts were not yet introduced. Saying that however, this book goes through the entire C++ standard of the time explaining the rationale, the possible implementations and features of the language. This is not a book to learn programming principles and patterns on C++, but to understand every aspect of the C++ language.

The Definitive C Book Guide and List

Source: The Definitive C Book Guide and List (Stack Overflow Answer)

Reference Style – All Levels



Above Intermediate

Uncategorized Additional C Programming Books

Smart and Deliberative Practice

Source: Peter Norvig: Teach Yourself Programming in Ten Years

Peter Norvig is a leading American computer scientist, expert on artificial intelligence and the Director of Research at Google Inc.

Researchers (Bloom (1985), Bryan & Harter (1899), Hayes (1989), Simmon & Chase (1973)) have shown it takes about ten years to develop expertise in any of a wide variety of areas, including chess playing, music composition, telegraph operation, painting, piano playing, swimming, tennis, and research in neuropsychology and topology. The key is deliberative practice: not just doing it again and again, but challenging yourself with a task that is just beyond your current ability, trying it, analyzing your performance while and after doing it, and correcting any mistakes. Then repeat. And repeat again. There appear to be no real shortcuts: even Mozart, who was a musical prodigy at age 4, took 13 more years before he began to produce world-class music. In another genre, the Beatles seemed to burst onto the scene with a string of #1 hits and an appearance on the Ed Sullivan show in 1964. But they had been playing small clubs in Liverpool and Hamburg since 1957, and while they had mass appeal early on, their first great critical success, Sgt. Peppers, was released in 1967.

Malcolm Gladwell has popularized the idea, although he concentrates on 10,000 hours, not 10 years. Henri Cartier-Bresson (1908-2004) had another metric: “Your first 10,000 photographs are your worst.” (He didn’t anticipate that with digital cameras, some people can reach that mark in a week.) True expertise may take a lifetime: Samuel Johnson (1709-1784) said “Excellence in any department can be attained only by the labor of a lifetime; it is not to be purchased at a lesser price.” And Chaucer (1340-1400) complained “the lyf so short, the craft so long to lerne.” Hippocrates (c. 400BC) is known for the excerpt “ars longa, vita brevis”, which is part of the longer quotation “Ars longa, vita brevis, occasio praeceps, experimentum periculosum, iudicium difficile”, which in English renders as “Life is short, [the] craft long, opportunity fleeting, experiment treacherous, judgment difficult.” Of course, no single number can be the final answer: it doesn’t seem reasonable to assume that all skills (e.g., programming, chess playing, checkers playing, and music playing) could all require exactly the same amount of time to master, nor that all people will take exactly the same amount of time. As Prof. K. Anders Ericsson puts it, “In most domains it’s remarkable how much time even the most talented individuals need in order to reach the highest levels of performance. The 10,000 hour number just gives you a sense that we’re talking years of 10 to 20 hours a week which those who some people would argue are the most innately talented individuals still need to get to the highest level.”

Some Valuable Life Lessons from Randy Pausch’s “The Last Lecture”

• Dream big. Give yourself permission to dream. Fuel your kids’ dreams, too.
• Don’t complain, just work harder. Complaining does not work as a strategy. We all have finite time and energy. Any time we spend whining is unlikely to help us achieve our goals. And it won’t make us happier.
• Treat the disease, not the symptom.
• Don’t obsess over what people think. If nobody ever worried about what was in other people’s heads, we’d all be more effective in our lives and on our jobs.
• Look for the best in everybody. When you’re frustrated with people, when they’ve made you angry, it just may be because you haven’t given them enough time.
• Experience is what you get when you didn’t get what you wanted. And experience is often the most valuable thing you have to offer.
• Show gratitude. Go out and do for others what somebody did for you.
• Tell the truth. Honesty is not only morally right, it’s also efficient. In a culture where everyone tells the truth, you can save a lot of time double-checking.
• No job is beneath you. You ought to be thrilled you got a job in the mailroom. And when you get there, here’s what you do: Be really great at sorting mail.
• If you want something bad enough, never give up (and take a boost when offered). Brick walls are there for a reason. They give us a chance to show how badly we want something.

Rest in peace, Dr. Pausch. Thank you so much for your inspirational life lessons!
Randy Pausch: Really achieving your childhood dreams | TED Talk | TED.com
“The Last Lecture” book on Amazon